Windows NT Error Codes – Part 02

121L  ERROR_SEM_TIMEOUT                     The semaphore timeout period
has expired.
122L  ERROR_INSUFFICIENT_BUFFER             The data area passed to a
system call is too small.
123L  ERROR_INVALID_NAME                    The file name, directory name,
or volume label is
syntactically incorrect.
124L  ERROR_INVALID_LEVEL                   The system call level is
incorrect.
125L  ERROR_NO_VOLUME_LABEL                 The disk has no volume label.
126L  ERROR_MOD_NOT_FOUND                   The specified module cannot be
found.
127L  ERROR_PROC_NOT_FOUND                  The specified procedure could
not be found.
128L  ERROR_WAIT_NO_CHILDREN                There are no child processes
to wait for.
129L  ERROR_CHILD_NOT_COMPLETE              The %1 application cannot be
run in Windows mode.
130L  ERROR_DIRECT_ACCESS_HANDLE            Attempt to use a file handle
to an open disk partition for
an operation other than raw
disk I/O.
131L  ERROR_NEGATIVE_SEEK                   An attempt was made to move
the file pointer before the
beginning of the file.
132L  ERROR_SEEK_ON_DEVICE                  The file pointer cannot be set
on the specified device or
file.
133L  ERROR_IS_JOIN_TARGET                  A JOIN or SUBST command cannot
be used for a drive that
contains previously joined
drives.
134L  ERROR_IS_JOINED                       An attempt was made to use a
JOIN or SUBST command on a
drive that is already joined.
135L  ERROR_IS_SUBSTED                      An attempt was made to use a
JOIN or SUBST command on a
drive already substituted.
136L  ERROR_NOT_JOINED                      The system attempted to delete
the JOIN of a drive not
previously joined.
137L  ERROR_NOT_SUBSTED                     The system attempted to delete
the substitution of a drive
not previously substituted.
138L  ERROR_JOIN_TO_JOIN                    The system tried to join a
drive to a directory on a
joined drive.
139L  ERROR_SUBST_TO_SUBST                  The system attempted to
substitute a drive to a
directory on a substituted
drive.
140L  ERROR_JOIN_TO_SUBST                   The system tried to join a
drive to a directory on a
substituted drive.
141L  ERROR_SUBST_TO_JOIN                   The system attempted to SUBST
a drive to a directory on a
joined drive.
142L  ERROR_BUSY_DRIVE                      The system cannot perform a
JOIN or SUBST at this time.
143L  ERROR_SAME_DRIVE                      The system cannot join or
substitute a drive to or for a
directory on the same drive.
144L  ERROR_DIR_NOT_ROOT                    The directory is not a
subdirectory of the root
directory.
145L  ERROR_DIR_NOT_EMPTY                   The directory is not empty.
146L  ERROR_IS_SUBST_PATH                   The path specified is being
used in a substitute.
147L  ERROR_IS_JOIN_PATH                    Not enough resources are
available to process this
command.
148L  ERROR_PATH_BUSY                       The specified path cannot be
used at this time.
149L  ERROR_IS_SUBST_TARGET                 An attempt was made to join or
substitute a drive for which a
directory on the drive is the
target of a previous
substitute.
150L  ERROR_SYSTEM_TRACE                    System trace information not
specified in your CONFIG.SYS
file, or tracing is not
allowed.
151L  ERROR_INVALID_EVENT_COUNT             The number of specified
semaphore events is incorrect.
152L  ERROR_TOO_MANY_MUXWAITERS             Too many semaphores are
already set.
153L  ERROR_INVALID_LIST_FORMAT             The list is not correct.
154L  ERROR_LABEL_TOO_LONG                  The volume label entered
exceeds the 11 character
limit. The first 11 characters
were written to disk. Any
characters that exceeded the
11 character limit were
automatically deleted.
155L  ERROR_TOO_MANY_TCBS                   Cannot create another thread.
156L  ERROR_SIGNAL_REFUSED                  The recipient process has
refused the signal.
157L  ERROR_DISCARDED                       The segment is already
discarded and cannot be
locked.
158L  ERROR_NOT_LOCKED                      The segment is already
unlocked.
159L  ERROR_BAD_THREADID_ADDR               The address for the thread ID
is incorrect.
160L  ERROR_BAD_ARGUMENTS                   The argument string passed to
DosExecPgm is incorrect.
161L  ERROR_BAD_PATHNAME                    The specified path name is
invalid.
162L  ERROR_SIGNAL_PENDING                  A signal is already pending.
164L  ERROR_MAX_THRDS_REACHED               No more threads can be created
in the system.
167L  ERROR_LOCK_FAILED                     Attempt to lock a region of a
file failed.
170L  ERROR_BUSY                            The requested resource is in
use.
173L  ERROR_CANCEL_VIOLATION                A lock request was not
outstanding for the supplied
cancel region.
174L  ERROR_ATOMIC_LOCKS_NOT_SUPPORTED      The file system does not
support atomic changing of the
lock type.
180L  ERROR_INVALID_SEGMENT_NUMBER          The system detected a segment
number that is incorrect.
182L  ERROR_INVALID_ORDINAL                 The operating system cannot
run %1.
183L  ERROR_ALREADY_EXISTS                  Attempt to create file that
already exists.
186L  ERROR_INVALID_FLAG_NUMBER             The flag passed is incorrect.
187L  ERROR_SEM_NOT_FOUND                   The specified system semaphore
name was not found.
188L  ERROR_INVALID_STARTING_CODESEG        The operating system cannot
run %1.
189L  ERROR_INVALID_STACKSEG                The operating system cannot
run %1.
190L  ERROR_INVALID_MODULETYPE              The operating system cannot
run %1.
191L  ERROR_INVALID_EXE_SIGNATURE           %1 cannot be run in Windows/NT
mode.
192L  ERROR_EXE_MARKED_INVALID              The operating system cannot
run %1.
193L  ERROR_BAD_EXE_FORMAT                  %1 is not a valid Windows-
based application.
194L  ERROR_ITERATED_DATA_EXCEEDS_64k       The operating system cannot
run %1.
195L  ERROR_INVALID_MINALLOCSIZE            The operating system cannot
run %1.
196L  ERROR_DYNLINK_FROM_INVALID_RING       The operating system cannot
run this application program.
197L  ERROR_IOPL_NOT_ENABLED                The operating system is not
presently configured to run
this application.
198L  ERROR_INVALID_SEGDPL                  The operating system cannot
run %1.
199L  ERROR_AUTODATASEG_EXCEEDS_64k         The operating system cannot
run this application program.
200L  ERROR_RING2SEG_MUST_BE_MOVABLE        The code segment cannot be
greater than or equal to 64KB.
201L  ERROR_RELOC_CHAIN_XEEDS_SEGLIM        The operating system cannot
run %1.
202L  ERROR_INFLOOP_IN_RELOC_CHAIN          The operating system cannot
run %1.
203L  ERROR_ENVVAR_NOT_FOUND                The system could not find the
environment option entered.
205L  ERROR_NO_SIGNAL_SENT                  No process in the command
subtree has a signal handler.
206L  ERROR_FILENAME_EXCED_RANGE            The file name or extension is
too long.
207L  ERROR_RING2_STACK_IN_USE              The ring 2 stack is in use.
208L  ERROR_META_EXPANSION_TOO_LONG         The global filename characters
* or ? are entered
incorrectly, or too many
global filename characters are
specified.
209L  ERROR_INVALID_SIGNAL_NUMBER           The signal being posted is
incorrect.
210L  ERROR_THREAD_1_INACTIVE               The signal handler cannot be
set.
212L  ERROR_LOCKED                          The segment is locked and
cannot be reallocated.
214L  ERROR_TOO_MANY_MODULES                Too many dynamic link modules
are attached to this program
or dynamic link module.
215L  ERROR_NESTING_NOT_ALLOWED             Can't nest calls to
LoadModule.
230L  ERROR_BAD_PIPE                        The pipe state is invalid.
231L  ERROR_PIPE_BUSY                       All pipe instances busy.
232L  ERROR_NO_DATA                         Pipe close in progress.
233L  ERROR_PIPE_NOT_CONNECTED              No process on other end of
pipe.
234L  ERROR_MORE_DATA                       More data is available.
240L  ERROR_VC_DISCONNECTED                 The session was canceled.
254L  ERROR_INVALID_EA_NAME                 The specified EA name is
invalid.
255L  ERROR_EA_LIST_INCONSISTENT            The EAs are inconsistent.
259L  ERROR_NO_MORE_ITEMS                   No more data is available.
266L  ERROR_CANNOT_COPY                     The Copy API cannot be used.
267L  ERROR_DIRECTORY                       The directory name is invalid.
275L  ERROR_EAS_DIDNT_FIT                   The EAs did not fit in the
buffer.
276L  ERROR_EA_FILE_CORRUPT                 The EA file on the mounted
file system is damaged.
277L  ERROR_EA_TABLE_FULL                   The EA table in the EA file on
the mounted file system is
full.
278L  ERROR_INVALID_EA_HANDLE               The specified EA handle is
invalid.
282L  ERROR_EAS_NOT_SUPPORTED               The mounted file system does
not support extended
attributes.
288L  ERROR_NOT_OWNER                       Attempt to release mutex not
owned by caller.
298L  ERROR_TOO_MANY_POSTS                  Too many posts made to a
semaphore.
299L  ERROR_PARTIAL_COPY                    Only part of a
Read/WriteProcessMemory
request was completed.
317L  ERROR_MR_MID_NOT_FOUND                The system cannot find message
for message number 0x%1 in
message file for %2.
487L  ERROR_INVALID_ADDRESS                 Attempt to access invalid
address.
534L  ERROR_ARITHMETIC_OVERFLOW             Arithmetic result exceeded 32-
bits.
535L  ERROR_PIPE_CONNECTED                  There is a process on other
end of the pipe.
536L  ERROR_PIPE_LISTENING                  Waiting for a process to open
the other end of the pipe.
994L  ERROR_EA_ACCESS_DENIED                Access to the EA is denied.
995L  ERROR_OPERATION_ABORTED               The I/O operation was aborted
due to either thread exit or
application request.
996L  ERROR_IO_INCOMPLETE                   Overlapped IO event not in
signaled state.
997L  ERROR_IO_PENDING                      Overlapped IO operation in
progress.
998L  ERROR_NOACCESS                        Invalid access to memory
location.
999L  ERROR_SWAPERROR                       Error accessing paging file.

Leave a Reply

Your email address will not be published. Required fields are marked *