Windows NT Error Codes – Part 03

1001L ERROR_STACK_OVERFLOW                  Recursion too deep, stack
overflowed.
1002L ERROR_INVALID_MESSAGE                 Window can't handle sent
message.
1003L ERROR_CAN_NOT_COMPLETE                Cannot complete function for
some reason.
1004L ERROR_INVALID_FLAGS                   The flags are invalid.
1005L ERROR_UNRECOGNIZED_VOLUME             The volume does not contain a
recognized file system. Make
sure that all required file
system drivers are loaded and
the volume is not damaged.
1006L ERROR_FILE_INVALID                    The volume for a file was
externally altered and the
opened file is no longer
valid.
1007L ERROR_FULLSCREEN_MODE                 The requested operation cannot
be performed in full-screen
mode.
1008L ERROR_NO_TOKEN                        An attempt was made to
reference a token that does
not exist.
1009L ERROR_BADDB                           The configuration registry
database is damaged.
1010L ERROR_BADKEY                          The configuration registry key
is invalid.
1011L ERROR_CANTOPEN                        The configuration registry key
cannot be opened.
1012L ERROR_CANTREAD                        The configuration registry key
cannot be read.
1013L ERROR_CANTWRITE                       The configuration registry key
cannot be written.
1014L ERROR_REGISTRY_RECOVERED              One of the files containing
the system's registry data had
to be recovered by use of a
log or alternate copy. The
recovery succeeded.
1015L ERROR_REGISTRY_CORRUPT                The registry is damaged. The
structure of one of the files
that contains registry data is
damaged, or the system's in
memory image of the file is
damaged, or the file could not
be recovered because its
alternate copy or log was
absent or damaged.
1016L ERROR_REGISTRY_IO_FAILED              The registry initiated an I/O
operation that had an
unrecoverable failure. The
registry could not read in, or
write out, or flush, one of
the files that contain the
system's image of the
registry.
1017L ERROR_NOT_REGISTRY_FILE               The system attempted to load
or restore a file into the
registry, and the specified
file is not in the format of a
registry file.
1018L ERROR_KEY_DELETED                     Illegal operation attempted on
a registry key that has been
marked for deletion.
1019L ERROR_NO_LOG_SPACE                    System could not allocate
required space in a registry
log.
1020L ERROR_KEY_HAS_CHILDREN                An attempt was made to create
a symbolic link in a registry
key that already has subkeys
or values.
1021L ERROR_CHILD_MUST_BE_VOLATILE          An attempt was made to create
a stable subkey under a
volatile parent key.
1022L ERROR_NOTIFY_ENUM_DIR                 This indicates that a notify
change request is being
completed and the information
is not being returned in the
caller's buffer. The caller
now needs to enumerate the
files to find the changes.
1051L ERROR_DEPENDENT_SERVICES_RUNNING      A stop control has been sent
to a service which other
running services are dependent
on.
1052L ERROR_INVALID_SERVICE_CONTROL         The requested control is not
valid for this service.
1053L ERROR_SERVICE_REQUEST_TIMEOUT         The service did not respond to
the start or control request
in a timely fashion.
1054L ERROR_SERVICE_NO_THREAD               A thread could not be created
for the service.
1055L ERROR_SERVICE_DATABASE_LOCKED         The service database is
locked.
1056L ERROR_SERVICE_ALREADY_RUNNING         An instance of the service is
already running.
1057L ERROR_INVALID_SERVICE_ACCOUNT         The account name is invalid or
does not exist.
1058L ERROR_SERVICE_DISABLED                The specified service is
disabled and cannot be
started.
1059L ERROR_CIRCULAR_DEPENDENCY             Circular service dependency
was specified.
1060L ERROR_SERVICE_DOES_NOT_EXIST          The specified service does not
exist as an installed service.
1061L ERROR_SERVICE_CANNOT_ACCEPT_CTRL      The service cannot accept
control messages at this time.
1062L ERROR_SERVICE_NOT_ACTIVE              The service has not been
started.
1063L ERROR_FAILED_SERVICE_CONTROLLER_CONNECT  The service process could
not connect to the service
controller.
1064L ERROR_EXCEPTION_IN_SERVICE            An exception occurred in the
service when handling the
control request.
1065L ERROR_DATABASE_DOES_NOT_EXIST         The database specified does
not exist.
1066L ERROR_SERVICE_SPECIFIC_ERROR          The service has returned a
service-specific error code.
1067L ERROR_PROCESS_ABORTED                 The process terminated
unexpectedly.
1068L ERROR_SERVICE_DEPENDENCY_FAIL         The dependency service or
group failed to start.
1069L ERROR_SERVICE_LOGON_FAILED            The service did not start due
to a logon failure.
1070L ERROR_SERVICE_START_HANG              After starting, the service
hung in a start-pending state.
1071L ERROR_INVALID_SERVICE_LOCK            The specified service database
lock is invalid.
1072L ERROR_SERVICE_MARKED_FOR_DELETE       The specified service has been
marked for deletion.
1073L ERROR_SERVICE_EXISTS                  The specified service already
exists.
1074L ERROR_ALREADY_RUNNING_LKG             The system is currently
running with the last-known-
good configuration.
1075L ERROR_SERVICE_DEPENDENCY_DELETED      The dependency service does
not exist or has been marked
for deletion.
1076L ERROR_BOOT_ALREADY_ACCEPTED           The current boot has already
been accepted for use as the
last-known-good control set.
1077L ERROR_SERVICE_NEVER_STARTED           No attempts to start the
service have been made since
the last boot.
1078L ERROR_DUPLICATE_SERVICE_NAME          The name is already in use as
either a service name or a
service display name.
1079L ERROR_DIFFERENT_SERVICE_ACCOUNT       The account specified for this
service is different from the
account specified for other
services running in the same
process.
1100L ERROR_END_OF_MEDIA                    The physical end of the tape
has been reached.
1101L ERROR_FILEMARK_DETECTED               A tape access reached a
filemark.
1102L ERROR_BEGINNING_OF_MEDIA              The beginning of the tape or
partition was encountered.
1103L ERROR_SETMARK_DETECTED                A tape access reached a
setmark.
1104L ERROR_NO_DATA_DETECTED                During a tape access, the end
of the data marker was
reached.
1105L ERROR_PARTITION_FAILURE               Tape could not be partitioned.
1106L ERROR_INVALID_BLOCK_LENGTH            When accessing a new tape of a
multivolume partition, the
current block size is
incorrect.
1107L ERROR_DEVICE_NOT_PARTITIONED          Tape partition information
could not be found when
loading a tape.
1108L ERROR_UNABLE_TO_LOCK_MEDIA            Attempt to lock the eject
media mechanism failed.
1109L ERROR_UNABLE_TO_UNLOAD_MEDIA          Unload media failed.
1110L ERROR_MEDIA_CHANGED                   Media in drive may have
changed.
1111L ERROR_BUS_RESET                       The I/O bus was reset.
1112L ERROR_NO_MEDIA_IN_DRIVE               Tape query failed because of
no media in drive.
1113L ERROR_NO_UNICODE_TRANSLATION          No mapping for the Unicode
character exists in the target
multi-byte code page.
1114L ERROR_DLL_INIT_FAILED                 A DLL initialization routine
failed.
1115L ERROR_SHUTDOWN_IN_PROGRESS            A system shutdown is in
progress.
1116L ERROR_NO_SHUTDOWN_IN_PROGRESS         An attempt to abort the
shutdown of the system failed
because no shutdown was in
progress.
1117L ERROR_IO_DEVICE                       The request could not be
performed because of an I/O
device error.
1118L ERROR_SERIAL_NO_DEVICE                No serial device was
successfully initialized. The
serial driver will unload.
1119L ERROR_IRQ_BUSY                        Unable to open a device that
was sharing an interrupt
request (IRQ) with other
devices. At least one other
device that uses that IRQ was
already opened.
1120L ERROR_MORE_WRITES                     A serial I/O operation was
completed by another write to
the serial port. (The
IOCTL_SERIAL_XOFF_COUNTER
reached zero.)
1121L ERROR_COUNTER_TIMEOUT                 A serial I/O operation
completed because the time-out
period expired. (The
IOCTL_SERIAL_XOFF_COUNTER did
not reach zero.)
1122L ERROR_FLOPPY_ID_MARK_NOT_FOUND        No ID address mark was found
on the floppy disk.
1123L ERROR_FLOPPY_WRONG_CYLINDER           Mismatch between the floppy
disk sector ID field and the
floppy disk controller track
address.
1124L ERROR_FLOPPY_UNKNOWN_ERROR            The floppy disk controller
reported an error that is not
recognized by the floppy disk
driver.
1125L ERROR_FLOPPY_BAD_REGISTERS            The floppy disk controller
returned inconsistent results
in its registers.
1126L ERROR_DISK_RECALIBRATE_FAILED         While accessing the hard disk,
a recalibrate operation
failed, even after retries.
1127L ERROR_DISK_OPERATION_FAILED           While accessing the hard disk,
a disk operation failed even
after retries.
1128L ERROR_DISK_RESET_FAILED               While accessing the hard disk,
a disk controller reset was
needed, but even that failed.
1129L ERROR_EOM_OVERFLOW                    Physical end of tape
encountered.
1130L ERROR_NOT_ENOUGH_SERVER_MEMORY        Not enough server storage is
available to process this
command.
1131L ERROR_POSSIBLE_DEADLOCK               A potential deadlock condition
has been detected.
1132L ERROR_MAPPED_ALIGNMENT                The base address or the file
offset specified does not have
the proper alignment.
1140L ERROR_SET_POWER_STATE_VETOED          An attempt to change the
system power state was vetoed
by another application or
driver.
1141L ERROR_SET_POWER_STATE_FAILED          The system BIOS failed an
attempt to change the system
power state.
1142L ERROR_TOO_MANY_LINKS                  An attempt was made to create
more links on a file than the
file system supports.
1150L ERROR_OLD_WIN_VERSION                 The specified program requires
a newer version of Windows.
1151L ERROR_APP_WRONG_OS                    The specified program is not a
Windows or MS-DOS program.
1152L ERROR_SINGLE_INSTANCE_APP             Cannot start more than one
instance of the specified
program.
1153L ERROR_RMODE_APP                       The specified program was
written for an older version
of Windows.
1154L ERROR_INVALID_DLL                     One of the library files
needed to run this application
is damaged.
1155L ERROR_NO_ASSOCIATION                  No application is associated
with the specified file for
this operation.
1156L ERROR_DDE_FAIL                        An error occurred in sending
the command to the
application.
1157L ERROR_DLL_NOT_FOUND                   One of the library files
needed to run this application
cannot be found.

Leave a Reply

Your email address will not be published. Required fields are marked *